| Certification: | RoHS, ISO, CE |
|---|---|
| Condition: | New |
| Automatic Grade: | Hydraulic |
|
Still deciding? Get samples of US$ 180/Piece
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Hydraul Strand Jack is based on multiple hoists or hoists working in coordination under a unified control system to achieve simultaneous lifting of materials or personnel. Such systems typically include the following key components:
1. Control system: responsible for coordinating the operation of each hoist to ensure that they run synchronously according to the scheduled procedure and schedule. The control system can be a simple timer or a complex computer control system.
2. Hoist: It is the equipment that performs the actual lifting task, which can be a hydraulic hoist, an electric winch or other types of lifting devices. Each hoist is equipped with a corresponding sensor and actuator.
3. Sensor: used to monitor the status of the hoist, such as position, speed, load, etc., and feed this information to the control system. Sensors ensure the hoist operates within safe parameters.
4. Actuator: according to the instructions of the control system, the execution of start, stop, accelerate, decelerate and other operations. The actuator can be a motor, hydraulic valve or other driving device.
5. Synchronization mechanism: Ensure that all elevators are synchronized during the lifting process to avoid load tilt, pulling or collision caused by inconsistent speeds. The synchronization mechanism can be mechanical or electronic.
In the Hydraul Strand Jack system, all lifts must be precisely coordinated to ensure a smooth and safe lifting process. This often requires complex control algorithms and precise sensor feedback to cope with various operating conditions and potential interference. Synchronous lifting is widely used in construction, mining, port loading and unloading and other fields.
| Model | tonnageTon | Stroke mm |
Body height mm | Stretch height mm | Cylinder outside diameter D(mm) | Weight Kg | Maximum working pressure Mpa(bar) |
| SFST-50 | 5 | 6.35 | 40 | 46.35 | 64×52 | 1.0 | 40(400) |
| SFST -100 | 10 | 11.2 | 48 | 59.2 | 83×66 | 1.4 | 63 (630) |
| SFST -200 | 20 | 11.2 | 56 | 67.2 | 100×84 | 3.1 | 63 (630) |
| SFST -300 | 30 | 12.7 | 66 | 78.7 | 128×105 | 4.5 | 63 (630) |
| SFST -500 | 50 | 16 | 75 | 91 | 145×128 | 6.8 | 63 (630) |
| SFST -750 | 75 | 16 | 86 | 102 | 188×158 | 11.4 | 63 (630) |
| SFST -1000 | 100 | 16 | 96 | 112 | 208×182 | 14.5 | 63 (630) |
| SFST-1500 | 150 | 16 | 106 | 122 | 250×220 | 26.3 | 63 (630) |
Preparation work:
If the amount of oil in the pump body is insufficient, it is necessary to add the working oil (10# oil) to the pump to work.
To estimate the weight, avoid overloading, and determine the center of gravity of the weight, select the point of impact of the jack, and consider the degree of softness and hardness of the ground, and use tough wood when necessary to prevent tipping hazards during lifting [2].
Jacking operation:
When in use, first butt the quick connector of the manual pump with the top, and then select the position, tighten the oil release screw on the oil pump, you can work.
The electric pump needs to be operated according to the electric operation manual.
Matters needing attention
Operator: The operator must have professional training and be familiar with the use of the equipment and safe operation procedures.
Environmental conditions: Ensure a safe operating environment. Do not perform jacking operations in bad weather or on unstable ground.
Maintenance: Regular maintenance of the hydraulic system to ensure the long-term stable operation of the equipment.
Through the above steps, we can ensure the safe and efficient use of synchronous jacking jacks and ensure the smooth progress of the project.
Q1: Warranty terms of your machine?
A1: One-year warranty for the machine and technical support according to your needs.
Q2: Will you provide some spare parts for the machines?
A2: Yes, of course.
Q3: What about the voltage of products? Can they be customized?
A3: Our standard voltage is 380V, 50HZ, and 3phase. The voltage can be customized according to your equipment.
Q4: Which payment term can you accept?
A4: 100% T/T( Decide according to actual situation)
Q5: How long will it take to arrange production?
A5: we can deliver the normal goods within 3-5 working days. Other nonstandard electrical items we will deliver within 25-30 days.
Q6: Can you accept OEM orders?
A6: Yes, with a professional design team, OEM orders are highly welcome.
Q7: Which trade term can you accept?
A7: Available trade terms: FOB, CIF, CFR, EXW, etc.
){kind=link}