| After-sales Service: | 1 Years |
|---|---|
| Warranty: | 1 Years |
| Type: | Hydraulic |
|
Still deciding? Get samples of US$ 6200/Piece
Order Sample
|
| Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
|---|
| Payment Methods: |
|
|---|---|
| Support payments in USD |
| Secure payments: | Every payment you make on Made-in-China.com is protected by the platform. |
|---|
| Refund policy: | Claim a refund if your order doesn't ship, is missing, or arrives with product issues. |
|---|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Synchronous lifting jacks are hydraulically driven. The hydraulic pump works under the action of the motor, so that the hydraulic oil is pressurized into the oil cylinder, and the piston is jacked up by force. It is equipped with an integrated synchronous monitoring and control system. In this system, sensors such as displacement and pressure are embedded in the jack, and real-time data is transmitted directly to the control center. The control center accurately controls the hydraulic oil flow and pressure of each jack according to the precise algorithm. In the museum of cultural relics handling, small errors may cause damage, multiple jacks rely on this system to achieve high precision synchronization and protect the safety of cultural relics.
10. After starting, the motor drives the hydraulic pump to extract the hydraulic oil from the oil tank and pressurize the oil cylinder, which is the initial power of the synchronous lifting jack. Its essence lies in the real-time synchronous adjustment mechanism, the sensor comprehensively monitors the lifting and loading of the jack, and the data is instantly fed back. The control system quickly balances the hydraulic oil distribution of each jack based on feedback. Like in the theater stage construction, multiple jacks need to be quickly and accurately synchronized, relying on this mechanism to easily cope with complex scenes and ensure efficient and perfect stage construction.
| Model | Safe working load | Working pressure MPA |
Cylinder stroke mm |
Retraction height mm |
Jack weight KG |
Fixed anchor weight KG |
Speed m/h |
Number of strands | Strand diameter mm |
| SFST-TSD45 | 45 | 31.5 | 500 | 1726 | 600 | 28 | 0-25 | 3 | 18 |
| SFST-TSD60 | 60 | 31.5 | 500 | 1726 | 630 | 32 | 0-25 | 4 | 18 |
| SFST-TSD100 | 100 | 31.5 | 500 | 1790 | 930 | 46 | 70-25 | 7 | 18 |
| SFST-TSD180 | 180 | 31.5 | 500 | 1886 | 1560 | 90 | 0-25 | 12 | 18 |
| SFST-TSD280 | 280 | 31.5 | 500 | 1938 | 2330 | 130 | 0-25 | 19 | 18 |
| SFST-TSD300 | 300 | 31.5 | 500 | 1940 | 2460 | 140 | 0-25 | 20 | 18 |
Preparation: First step, the top, middle and lower three automatic tool anchors of the jack are all in a relaxed jacking state (controlled by the auxiliary pump, and the automatic tool anchor controls the oil cylinder to jack up the anchor disc). (Some jack pistons extend out about 100mm, which is conducive to removing the pre-tightening jack or temporary wrong after pre-adjustment.) In the second step, the anchor of the fixed end tool is lifted with a pad, and the distance between the anchor and the lower cover plate is about 300mm, and the anchor is loose. The third step, threading through the upper, middle and lower three automatic tools wrong, check each hole instrument is correct, put the steel wire into the guide tube. Process: First, put the steel line into the guide tube, push it into the jack, and a person above the wrong part of the automatic tool gently holds the lead of the guide tube and moves with the thrust of the steel line.
Second, when the steel line comes out from the lower part of the cylinder, remove the guide pipe lead, lower the steel line until the speed slows down when approaching the anchor of the lower automatic tool, and pass through the wrong automatic tool at the alignment hole.
Third, when the steel line is 4-5 meters away from the anchor of the fixed end tool, the insert clip should be tightened at any time. If the steel line needs to be lowered, the clip should be lifted up and then locked until the steel line passes through the anchor hole where the fixed end tool should enter the clip, and the steel wire head enters the central plate hole for positioning. The upper personnel will loosen the steel grain line, that is, the steel lifting strand will be tightened on the automatic tool anchor clip. Fourth, lifting the upper steel lines beyond the automatic tool anchor 500mm, through the steel strand, the top of the jack 5 people, division of labor :1 person responsible for communication, 1 person responsible for placing pieces, hole position, other people responsible for paying off: the lower jack 2 people responsible for checking the automatic tool anchor and hole position, and finally connect the guide pipe lead; 3 people at the anchor of the lower fixed tool, and the work of wearing the clip, observing the lowering of the steel strand, and finally tightening. Fifth, when threading the strand, there should be good communication up and down, and the threading order should be stipulated in advance. Generally, the threading order can be used first inside and out, clockwise or counterclockwise, and the threading order can also be selected according to the row and column. When threading, the axis of the fixed tool anchor should be the same as that of the jack, and the line should be threaded after setting the order. When the automatic tool is incorrectly placed under the steel thread, it should be noted that the direction of the placing should be a certain distance from the worn steel strand to prevent twisting. Sixth, after the steel line of a jack is worn according to the above method, the anchor of the fixing tool is lifted close to the dislocation clamping clip, the press plate is set, the fixed bolt is inserted, and the next pre-tightening can be carried out after inspection.
Shaanxi Saifusite Mechanical Electrical Equipment Co., Ltd. is a professional engaged in hydraulic mining equipment, hydraulic construction machinery equipment, ultra-high pressure pumping station, oil cylinder research, development, manufacturing and other enterprises.
Shaanxi Saifusite Mechanical Electrical Equipment Co., Ltd. produces various types of splitting gun, splitting rod, splitting machine, digging and drilling machine, electric hydraulic pump, high pressure cylinder, high pressure jack, synchronous lifting equipment, crushing hammer and other hydraulic machines and tools.
Shaanxi Saifusite Mechanical Electrical Equipment Co., has decades of experience in ultra-high voltage equipment. No matter today or in the future, it is absolutely a reliable and excellent brand.
){kind=link}