| Certification: | RoHS, ISO, CE |
|---|---|
| Condition: | New |
| Automatic Grade: | Hydraulic |
|
Still deciding? Get samples of US$ 600/Piece
Order Sample
|
| Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
|---|
| Payment Methods: |
|
|---|---|
| Support payments in USD |
| Secure payments: | Every payment you make on Made-in-China.com is protected by the platform. |
|---|
| Refund policy: | Claim a refund if your order doesn't ship, is missing, or arrives with product issues. |
|---|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
The working principle of the front clamp jack involves the exquisite coordination of hydraulic and mechanical structures. The hydraulic oil enters the cylinder under the action of the pump and pushes the piston forward. In the initial state, the gripper assembly has firmly clamped the steel strand, and the forward movement of the piston is converted into the tensile force on the steel strand, so that the prestress is generated inside the steel strand. In the tensioning process, the size and speed of the tensioning force can be precisely controlled by adjusting the flow and pressure of the hydraulic oil. After reaching the preset tensile force, the pressure holding function of the jack starts to maintain the force value unchanged. After the prestress is stabilized, the oil return process makes the piston return, and the clip is released from the steel strand. This process repeats, providing a reliable means of prestressing the prestressed concrete structure and enhancing the bearing capacity and durability of the structure
| Item | Unit | Value |
| Nominal tension | KN | 257 |
| Nominal oil pressure | MPA | 50 |
| Tension piston area | M2 | 5.137*10 |
| Return piston area | M2 | 1.335*10 |
| Piercing hole diameter | MM | 19 |
| Trolley trip | MM | 200 |
| Dimensions | MM | 180*568 |
| Return oil pressure | MPA | Less than or equal to 25 |
Usage method
1. Prepare
- Check the appearance of the jack to ensure that all components are intact, no damage, no leakage. In particular, it is necessary to check whether the clip is worn, deformed, and whether the cylinder surface is cracked.
- Connect the oil pipe between the hydraulic pump and the jack to ensure that the connection is strong and the oil pipe is not broken.
- According to the required amount of prestress, determine the pressure setting value of the oil pump and adjust it accordingly.
2. Install the jack and steel strand
- Install the front clamp jack at the proper position at the front end of the prestressed steel strand, so that the clamp can accurately jam the steel strand. It is necessary to ensure that the central axis of the jack and the steel strand coincide as much as possible to avoid eccentric tension.
3. Tension operation
- Open the hydraulic oil pump, so that the hydraulic oil slowly into the jack cylinder, push the piston forward. The piston drives the clamp, thus stretching the strand and beginning to apply the prestress. In the tensioning process, pay close attention to the pressure display on the oil pump and the stroke of the jack, and gradually increase the prestress according to the pre-set tensioning procedure.
- When the prestress value required by the design is reached, the oil inlet valve of the oil pump is closed and the pressure is maintained for a period of time, generally 2-5 minutes, to stabilize the prestress and reduce the relaxation of the steel strand.
4. Oil return and unloading
- After the prestress is stabilized, open the oil return valve of the oil pump to allow the hydraulic oil to return to the oil tank of the oil pump. The piston will gradually retreat during the oil return process, and the clip will also release the steel strand, completing a tension operation.
- Remove the jack to prepare for the next tensioning or subsequent engineering operations.
Matters needing attention
1. Operation safety
- The operator must be professionally trained and familiar with the operation process and safety precautions of the jack. During the stretching process, the operator should stand in a safe position to avoid personal injury caused by accidents such as jack or steel strand breakage.
- Warning signs should be set up around the tensioning site to prohibit irrelevant personnel from entering the operation area.
2. Check and maintain the equipment
- Regular inspection, maintenance and maintenance of the jack. The integrity of the equipment should be checked before and after each use, such as serious wear of the clip, leakage of the oil cylinder and other problems, should be replaced or repaired in time.
- After the jack is used, the oil and debris on the surface should be cleaned and stored in a dry and well-ventilated place to avoid moisture and rust of the equipment.
3. Tensioning process
- When tensioning, it is necessary to operate in strict accordance with the tension sequence and tension stress required by the design. Avoid overtension or tension sequence error, resulting in uneven structure force or cracks and other quality problems.
- During the tension process, pay attention to the state of the steel strand and jack. If it is found that the steel strand has the phenomenon of sliding wire, broken wire, or the jack has abnormal sound, shaking, etc., it should stop the tension immediately, check the cause and deal with it.
Q1: Warranty terms of your machine?
A1: One-year warranty for the machine and technical support according to your needs.
Q2: Will you provide some spare parts for the machines?
A2: Yes, of course.
Q3: What about the voltage of products? Can they be customized?
A3: Our standard voltage is 380V, 50HZ, and 3phase. The voltage can be customized according to your equipment.
Q4: Which payment term can you accept?
A4: 100% T/T( Decide according to actual situation)
Q5: How long will it take to arrange production?
A5: we can deliver the normal goods within 3-5 working days. Other nonstandard electrical items we will deliver within 25-30 days.
Q6: Can you accept OEM orders?
A6: Yes, with a professional design team, OEM orders are highly welcome.
Q7: Which trade term can you accept?
A7: Available trade terms: FOB, CIF, CFR, EXW, etc.
){kind=link}