| After-sales Service: | 1 Years |
|---|---|
| Warranty: | 1 Years |
| Type: | Hydraulic |
|
Still deciding? Get samples of US$ 6000/Piece
Order Sample
|
| Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
|---|
| Payment Methods: |
|
|---|---|
| Support payments in USD |
| Secure payments: | Every payment you make on Made-in-China.com is protected by the platform. |
|---|
| Refund policy: | Claim a refund if your order doesn't ship, is missing, or arrives with product issues. |
|---|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
When the jack works, the hydraulic pump pumps oil from the tank and pressurizes it into the cylinder under the drive of the motor. The cylinder converts oil pressure into mechanical force according to Pasca's law, driving the piston upward. Its synchronous coordination relies on a sophisticated wired control system. Each jack is connected to the master by cable, and the master receives the displacement and pressure data of the sensor. After comparing the standard value, the hydraulic oil of each jack is precisely controlled, so as to realize the synchronous lifting of the port container and improve the efficiency and safety of the operation.
| Model | Safe working load | Working pressure MPA |
Cylinder stroke mm |
Retraction height mm |
Jack weight KG |
Fixed anchor weight KG |
Speed m/h |
Number of strands | Strand diameter mm |
| SFST-TSD45 | 45 | 31.5 | 500 | 1726 | 600 | 28 | 0-25 | 3 | 18 |
| SFST-TSD60 | 60 | 31.5 | 500 | 1726 | 630 | 32 | 0-25 | 4 | 18 |
| SFST-TSD100 | 100 | 31.5 | 500 | 1790 | 930 | 46 | 70-25 | 7 | 18 |
| SFST-TSD180 | 180 | 31.5 | 500 | 1886 | 1560 | 90 | 0-25 | 12 | 18 |
| SFST-TSD280 | 280 | 31.5 | 500 | 1938 | 2330 | 130 | 0-25 | 19 | 18 |
| SFST-TSD300 | 300 | 31.5 | 500 | 1940 | 2460 | 140 | 0-25 | 20 | 18 |
1. Safe operation
- The operator must be professionally trained and familiar with the operation method and safety precautions of the jack. During operation, wear personal protective equipment, such as safety helmet, gloves, etc.
- It is strictly prohibited to use jack with overload. Before working, it is necessary to accurately estimate the weight of the heavy object and ensure that the carrying capacity of the jack has sufficient safety margin. At the same time, during the lifting process, pay close attention to the working state and load of the jack, and stop the operation immediately once an anomaly is found.
2. Synchronous maintenance
- For synchronous lifting jacks, the accuracy of the synchronous control system should be checked regularly. If the synchronization error is found to exceed the specified range, adjust it in time. In the working process, try to avoid external factors to interfere with the synchronous work of the jack, such as uneven ground settlement, external force collision and so on.
- When multiple jacks work at the same time, the load distribution of each jack should be as evenly as possible. This can be achieved by pre-adjusting the initial height or load of the jack to ensure the stability of synchronous lifting.
3. Equipment maintenance and maintenance
- Perform regular maintenance on the jack, check the oil quality and oil amount of the hydraulic oil (if it is a hydraulic jack). The oil quality should be replaced in time, and the insufficient oil should be added to the specified liquid level. At the same time, check whether the seal leaks, if there is a leak to replace the seal in time.
- After the work, the jack should be cleaned and stored in a dry and well-ventilated place. Avoid exposing the jack to damp and corrosive environment for a long time to prevent parts from rusting and damage.
4. Emergency handling
- Remain calm in case of power failure or equipment failure during hoisting. For jacks with self-locking devices, rely on the self-locking function to prevent heavy objects from falling. If there is no self-locking device, take emergency measures, such as using auxiliary supports to support heavy objects, to avoid danger.
- Prepare the necessary emergency tools and equipment, such as backup power supply, hand pumps (for hydraulic jacks), etc., in order to be able to deal with the problem in an emergency.
Shaanxi Saifusite Mechanical Electrical Equipment Co., Ltd. is a professional engaged in hydraulic mining equipment, hydraulic construction machinery equipment, ultra-high pressure pumping station, oil cylinder research, development, manufacturing and other enterprises.
Shaanxi Saifusite Mechanical Electrical Equipment Co., Ltd. produces various types of splitting gun, splitting rod, splitting machine, digging and drilling machine, electric hydraulic pump, high pressure cylinder, high pressure jack, synchronous lifting equipment, crushing hammer and other hydraulic machines and tools.
Shaanxi Saifusite Mechanical Electrical Equipment Co., has decades of experience in ultra-high voltage equipment. No matter today or in the future, it is absolutely a reliable and excellent brand.
){kind=link}