| After-sales Service: | 1 Years |
|---|---|
| Warranty: | 1 Years |
| Type: | Hydraulic |
|
Still deciding? Get samples of US$ 8000/Piece
Order Sample
|
| Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
|---|
| Payment Methods: |
|
|---|---|
| Support payments in USD |
| Secure payments: | Every payment you make on Made-in-China.com is protected by the platform. |
|---|
| Refund policy: | Claim a refund if your order doesn't ship, is missing, or arrives with product issues. |
|---|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Hydraulic Strand jack
1. Determine the type of use of Hydraulic Strand jack: Select the right Hydraulic Strand jack according to the purpose and bearing capacity.
2. Select the support point and operating space: Before using the jack, determine the support point and operating space to ensure that the support point or operating space will not be arbitrarily changed during the operation.
3. Check the jack: Check whether Hydraulic Strand jack is damaged or loose to ensure that the jack is in good condition.
4. Adjust the height: When operating the jack, first adjust Hydraulic Strand jack to close to the support.
5. Place the base: the base of Hydraulic Strand jack should be smoothly placed on the support.
1. Check whether the Hydraulic Strand jack is normal before use.
2. Hydraulic Strand jack should strictly comply with the provisions of the main parameters, avoid ultra-high overload, otherwise when the lifting height or lifting tonnage
When the limit is exceeded, serious oil leakage will occur at the top of the cylinder.
3. such as manual pump body oil amount is insufficient, need to add to the pump should be fully filtered N33# hydraulic oil to work
Do.
4. Please refer to the manual for Synchronous lifting electric pump.
5. The center of gravity to choose moderate, reasonable choice of jack point of impact, the bottom surface to pad flat, while taking into account the ground
Soft and hard conditions, whether to liner tough wood, placing is smooth, so as not to load down or tilt.
6. After lifting the heavy object, the heavy object should be supported firmly with the support in time, and the jack is prohibited as a support
Use. If you need to support heavy objects for a long time, choose CLL self-locking jack
7. If you need several jacks lifting at the same time, in addition to the correct placement of the jack, should use multiple shunt valve, and each
The load of the jack should be balanced, and attention should be paid to keeping the lifting speed synchronized. The possibility of subsidence due to uneven weight must also be considered
The situation is to prevent the danger of tilting the object being lifted.
8. When Synchronous lifting is used, the quick joint of the manual pump is first connected to the top, and then the position is selected and the oil release screw on the oil pump is tightened to work. To lower the piston rod, manually he handwheel of the oil pump is slightly loosened in the counterclockwise direction, the cylinder is unloaded, and the piston rod is gradually lowered. Otherwise too fast a descent will be dangerous.
| Model | Safe working load | Working pressure MPA |
Cylinder stroke mm |
Retraction height mm |
Jack weight KG |
Fixed anchor weight KG |
Speed m/h |
Number of strands | Strand diameter mm |
| SFST-TSD45 | 45 | 31.5 | 500 | 1726 | 600 | 28 | 0-25 | 3 | 18 |
| SFST-TSD60 | 60 | 31.5 | 500 | 1726 | 630 | 32 | 0-25 | 4 | 18 |
| SFST-TSD100 | 100 | 31.5 | 500 | 1790 | 930 | 46 | 70-25 | 7 | 18 |
| SFST-TSD180 | 180 | 31.5 | 500 | 1886 | 1560 | 90 | 0-25 | 12 | 18 |
| SFST-TSD280 | 280 | 31.5 | 500 | 1938 | 2330 | 130 | 0-25 | 19 | 18 |
| SFST-TSD300 | 300 | 31.5 | 500 | 1940 | 2460 | 140 | 0-25 | 20 | 18 |
){kind=link}