| Certification: | RoHS, ISO, CE |
|---|---|
| Condition: | New |
| Automatic Grade: | Hydraulic |
|
Still deciding? Get samples of $ !
Order Sample
|
| Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
|---|
| Payment Methods: |
|
|---|---|
| Support payments in USD |
| Secure payments: | Every payment you make on Made-in-China.com is protected by the platform. |
|---|
| Refund policy: | Claim a refund if your order doesn't ship, is missing, or arrives with product issues. |
|---|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Synchronous enhancement products stand out in many fields with their superior performance. The synchronous lifting jack in the system is the key component, its internal structure is optimized, the sealing performance is good, and it can stably lift heavy objects under the action of high pressure hydraulic oil. The hydraulic pump station uses a combination of energy-saving motors and efficient oil pumps to provide sufficient power while...
- Hydraulic pump station:
- As a power source for the entire system, providing high pressure hydraulic oil for the jack. It usually includes motor, oil pump, fuel tank, filter and other components. The motor drives the oil pump to operate, and the hydraulic oil in the tank is extracted and pressurized before being transported out.
- The output oil pressure and flow can be adjusted according to the actual engineering needs, and some advanced hydraulic pump stations also have the automatic adjustment function of pressure and flow to adapt to the complex and varied lifting conditions.
- Control system:
- This is the "brain" of the synchronous enhancement product. Data is collected through sensors installed at each lifting point, such as jack travel, speed, load pressure and other information.
- The collected data can be analyzed and processed in real time, and once the difference between different lifting points is found, the automatic command is issued to precisely adjust the hydraulic oil flow and pressure of each jack, thus ensuring that each lifting point moves in sync with the set requirements strictly. The system can also set a variety of lifting modes and parameters, which is convenient for users to flexibly configure according to the specific project.
- Sensor:
- Is a key detection element to achieve synchronous lifting. For example, the displacement sensor can accurately measure the stroke change of the jack, and the pressure sensor can monitor the pressure situation in the hydraulic system in real time.
- The accuracy of the sensor directly affects the accuracy of synchronous enhancement, usually high-precision and high-reliability sensors are used, which can work stably in harsh engineering environments to ensure timely and accurate data feedback.
| Model | Safe working load | Working pressure MPA |
Cylinder stroke mm |
Retraction height mm |
Jack weight KG |
Fixed anchor weight KG |
Speed m/h |
Number of strands | Strand diameter mm |
| SFST-TSD45 | 45 | 31.5 | 500 | 1726 | 600 | 28 | 0-25 | 3 | 18 |
| SFST-TSD60 | 60 | 31.5 | 500 | 1726 | 630 | 32 | 0-25 | 4 | 18 |
| SFST-TSD100 | 100 | 31.5 | 500 | 1790 | 930 | 46 | 70-25 | 7 | 18 |
| SFST-TSD180 | 180 | 31.5 | 500 | 1886 | 1560 | 90 | 0-25 | 12 | 18 |
| SFST-TSD280 | 280 | 31.5 | 500 | 1938 | 2330 | 130 | 0-25 | 19 | 18 |
| SFST-TSD300 | 300 | 31.5 | 500 | 1940 | 2460 | 140 | 0-25 | 20 | 18 |
Application field
- Construction engineering: for the overall translation and jacking transformation of large buildings, such as the protection and relocation of historical buildings, the correction of high-rise buildings, etc.
- Bridge engineering: plays an important role in the installation process of Bridges, such as the simultaneous erection of prefabricated beams, as well as the overall jacking of Bridges during maintenance and reinforcement.
- Installation of industrial equipment: Installation and commissioning of large industrial equipment, such as generator sets, chemical equipment, heavy machine tools, etc., using synchronous lifting products can ensure the accurate placement of equipment.
1. Construction engineering
- Building overall jacking: For some buildings requiring overall displacement or renovation of the ground floor space, synchronous lifting technology can lift the entire building. For example, in the protection and migration of ancient buildings, by setting synchronous lifting jacks under the building foundation, the building can be smoothly lifted and moved to a new location or developed underground space at the original site without damaging the original structure of the building.
- Building correction: When the building tilts due to uneven settlement of the foundation and other reasons, synchronous lifting can be used to correct the building. The lifting equipment is placed on the side of the building where the settlement is less, and the building is gradually righted by precisely controlling the lifting force and displacement.
2. Bridge engineering
- Erection of prefabricated bridge beams: During the erection of prefabricated beams, synchronous lifting equipment is used to lift the prefabricated beams from the transport vehicles and accurately place them on the supports of the piers. Since prefabricated beams are usually heavier, synchronous lifting can ensure that multiple lifting points apply force at the same time, so that the beam body is in place smoothly and accurately, and avoid damage due to uneven force.
- Complete bridge jacking maintenance or renovation: For some Bridges that need to replace bridge supports, repair the substructure or undergo widening, the synchronous lifting system can be used to complete the bridge jacking. For example, the bridge support is replaced without interrupting the traffic, the bridge upper structure is lifted to a certain height by synchronous lifting jacks, and the bridge is lowered smoothly after the replacement of the support, minimizing the impact on traffic.
3. Large equipment installation field
- Heavy industrial equipment installation: In factories, the installation of heavy equipment such as generator sets, large presses, rolling mills, etc., requires extremely high precision. The synchronous lifting device lifts the equipment from the transport vehicle and accurately places the equipment on the foundation or platform according to the design requirements to ensure the levelness and position accuracy of the equipment and ensure the normal operation of the equipment.
- Installation of offshore wind power equipment: the components of offshore wind turbines, such as towers, nacelles and blades, are huge in volume and weight. The synchronous lifting technology is used for the installation of offshore wind power equipment, which can be operated on a ship or offshore platform, and the components are precisely assembled to ensure installation quality and efficiency, and adapt to complex offshore working environments.
4. Applications in the energy industry
- Petrochemical equipment installation and maintenance: petrochemical enterprises have many large reactors, storage tanks and other equipment, the installation and maintenance of these equipment, synchronous lifting equipment can ensure the safe lifting and accurate installation of equipment. For example, in the construction of a large oil storage tank, the placement of the tank requires a synchronous lifting system to control the descent speed and position of the tank and ensure a good docking between the tank and the foundation.
- Installation of large modules in nuclear power plants: there are some large containment, steam generator and other modules in nuclear power plants, and their installation accuracy is extremely high. Synchronous lifting technology can meet the high-precision installation requirements of these modules, and ensure the construction quality and operation safety of nuclear power plants.
5. Stage and exhibition industry applications
- Stage scene construction and lifting: In large-scale theatrical performances, theater stages and other scenes, synchronous lifting equipment can be used to build complex stage scenes. For example, multiple synchronous lifting points are used to control the lifting of the stage background and multi-layer stage structure to achieve diversified stage effects.
In some large-scale exhibitions, for the display of super-large exhibits (such as large mechanical models, aerospace equipment, etc.), synchronous lifting equipment can be used to raise the exhibits to the appropriate height, adjust the display Angle, and provide the audience with a better viewing experience.
Q1: Warranty terms of your machine?
A1: One-year warranty for the machine and technical support according to your needs.
Q2: Will you provide some spare parts for the machines?
A2: Yes, of course.
Q3: What about the voltage of products? Can they be customized?
A3: Our standard voltage is 380V, 50HZ, and 3phase. The voltage can be customized according to your equipment.
Q4: Which payment term can you accept?
A4: 100% T/T( Decide according to actual situation)
Q5: How long will it take to arrange production?
A5: we can deliver the normal goods within 3-5 working days. Other nonstandard electrical items we will deliver within 25-30 days.
Q6: Can you accept OEM orders?
A6: Yes, with a professional design team, OEM orders are highly welcome.
Q7: Which trade term can you accept?
A7: Available trade terms: FOB, CIF, CFR, EXW, etc.
){kind=link}