| After-sales Service: | 1 Years |
|---|---|
| Warranty: | 1 Years |
| Type: | Hydraulic |
|
Still deciding? Get samples of US$ 8000/Piece
Order Sample
|
| Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
|---|
| Payment Methods: |
|
|---|---|
| Support payments in USD |
| Secure payments: | Every payment you make on Made-in-China.com is protected by the platform. |
|---|
| Refund policy: | Claim a refund if your order doesn't ship, is missing, or arrives with product issues. |
|---|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Hydraulic Strand jack
The working principle of synchronous lifting jack involves the cooperative operation of hydraulic and electronic control. In the hydraulic part, high-pressure hydraulic oil is produced by the hydraulic pump, and after entering the hydraulic cylinder of the jack, the hydraulic oil exerts a force on the piston. The movement of the piston in the hydraulic cylinder is transformed into the vertical lifting movement of the ejector rod, and the initial lifting ability of the heavy object is realized. The synchronous control is realized by a complex electronic control system. The sensors in the system are keen "eyes" that pay close attention to the operation details of each jack, including lifting height, speed and hydraulic pressure. When the synchronization error between different jacks is detected, the electronic control system quickly calculates and issues instructions to adjust the hydraulic oil supply and pressure value of each jack. This precise adjustment mechanism allows multiple jacks to lift heavy objects synchronously and accurately as a whole, meeting the needs of high-precision installation scenarios such as Bridges and large machinery
1. Check whether the Hydraulic Strand jack is normal before use.
2. Hydraulic Strand jack should strictly comply with the provisions of the main parameters, avoid ultra-high overload, otherwise when the lifting height or lifting tonnage
When the limit is exceeded, serious oil leakage will occur at the top of the cylinder.
3. such as manual pump body oil amount is insufficient, need to add to the pump should be fully filtered N33# hydraulic oil to work
Do.
4. Please refer to the manual for Synchronous lifting electric pump.
5. The center of gravity to choose moderate, reasonable choice of jack point of impact, the bottom surface to pad flat, while taking into account the ground
Soft and hard conditions, whether to liner tough wood, placing is smooth, so as not to load down or tilt.
6. After lifting the heavy object, the heavy object should be supported firmly with the support in time, and the jack is prohibited as a support
Use. If you need to support heavy objects for a long time, choose CLL self-locking jack
7. If you need several jacks lifting at the same time, in addition to the correct placement of the jack, should use multiple shunt valve, and each
The load of the jack should be balanced, and attention should be paid to keeping the lifting speed synchronized. The possibility of subsidence due to uneven weight must also be considered
The situation is to prevent the danger of tilting the object being lifted.
| Model | Safe working load | Working pressure MPA |
Cylinder stroke mm |
Retraction height mm |
Jack weight KG |
Fixed anchor weight KG |
Speed m/h |
Number of strands | Strand diameter mm |
| SFST-TSD45 | 45 | 31.5 | 500 | 1726 | 600 | 28 | 0-25 | 3 | 18 |
| SFST-TSD60 | 60 | 31.5 | 500 | 1726 | 630 | 32 | 0-25 | 4 | 18 |
| SFST-TSD100 | 100 | 31.5 | 500 | 1790 | 930 | 46 | 70-25 | 7 | 18 |
| SFST-TSD180 | 180 | 31.5 | 500 | 1886 | 1560 | 90 | 0-25 | 12 | 18 |
| SFST-TSD280 | 280 | 31.5 | 500 | 1938 | 2330 | 130 | 0-25 | 19 | 18 |
| SFST-TSD300 | 300 | 31.5 | 500 | 1940 | 2460 | 140 | 0-25 | 20 | 18 |
){kind=link}