Factory Supply Concrete Mortar Spray/Spraying Plastering Machine/Shotcrete Machine for Sale

Product Description

Product Description

Mortar spraying machine
Mortar spraying machine is specially used to spray mortar professional spraying machine, for mortar particles in the four or five millimeters below the mortar can be used for spraying.
Mortar spraying machine is suitable for all kinds of building shotcrete construction, is my company through perfect design, with excellent industrial technology to produce this kind of reliable performance, strong adaptability, durable, simple operation of cement mortar spraying unit, by all levels of the construction industry praise and praise. My factory combined with the current market appearance of the grid structure sound insulation, insulation system of CS board, SB board, polystyrene board (EPS), polystyrene particle board and so on, these new mortar spraying machine on the grid is easy to operate, high hardness, good adhesion, no hollow drum, cracking and other phenomena; However, the mortar wall surface of manual operation grid structure is difficult, low hardness, insufficient adhesion, easy to appear empty drum, cracking and so on. Spraying scope: ordinary mortar, thermal insulation mortar, dry mortar, crack resistant mortar, interface agent, putty powder, building glue, adhesive, fireproof material, epoxy coating.

Product Parameters

 

Wall Cement Mortar Spraying Machine
Model	AWY-311	AWY-511
Vertical conveying distance	10m	20m
Horizontal conveying distance	20m	30m
Sand-to-cement ratio	1:3	1:3
Motor power	4kw/Air pump motor 2.2KW	7.5kw/Air pump motor 2.2KW
Mortar conveying capacity	1.5m³/h	2m³/h
Work efficiency	100²/h	150²/h
Machine size	1300*450*750 (mm)	1780*640*1200(mm)
Packing size	1530*530*1100(mm)	1700*600*1100(mm)
Hopper volume	60L	80L
Inner diameter of material tube	32mm	32mm
Work pressure	3-6Map	5-8Map
Voltage	380V/220V	380V
Maximum passing particles	5mm	5mm
Application scope	Mortar putty coating, etc.
Factory standard equipment	10m material pipe, 10m air pipe, 1 gun with 5 nozzles
Weight	180kg	280kg
Packing weight	200kg	300kg

Product Features

Mortar spraying machine
Advantages of Mortar spraying machine:
1. The Mortar spraying machine basically has no ground ash. Mortar spraying machine saves water and materials. The use of Mortar spraying machine can reduce the cost by more than 20%.
2. Simple operation of Mortar spraying machine. Mortar spraying machine no scaffolding, no moving equipment, no tinkering. Mortar spraying machine for Yin and Yang Angle, roof and other environment can spray freely. Mortar spraying machine shorted the construction period and improved the progress, and saved the expenditure of frame material.
3. Mortar spraying machine has the advantages of high speed, high efficiency and low labor intensity. A Mortar spraying machine can easily spray 150 square meters per hour. Excluding the preparation time, Mortar spraying machine can spray more than 1000 square meters after working 8 hours a day, which is equivalent to 20 skilled workers working hard for one day.
4, Mortar spraying machine investment is small, large income. If every day each Mortar spraying machine spraying 1000 square meters.
5. The engineering quality of Mortar spraying machine is guaranteed. Because of the artificial powder wall and the previous launch of the powder wall machine, the main disadvantage is the mortar and wall cohesion and compactness. Mortar spraying machine has large flow and high pressure, which can overcome these defects and avoid the trouble and loss caused by quality, construction period and cost.
6. Mortar spraying machine is multi-purpose. Mortar spraying machine can spray mortar, fireproofing, refractory materials, insulation materials, and is not affected by regional and environmental conditions and by the shape of the spray surface.

Installation Instructions

Operation method of mortar spraying machine;
one Start the power supply of mortar spraying machine, press the button, the spiral pump of mortar spraying machine will start to work. If the steering is reversed, press the stop button to stop the mortar spraying machine.
2. Inject a small amount of water into the inlet of the mortar spraying machine conveying hose, or pump water with a spiral pump to wet the conveying hose. Then the pipe storage water is gradually discharged from the outlet. Drainage should be clean and no surplus water should be retained in the pipe.
3. Tie the air pipe of mortar spraying machine and the mortar pipe side by side. The mortar spraying machine connects the air duct to the spray gun.
4. Put the evenly mixed material into the hopper of mortar spraying machine (can be used with powder opening machine).
5. Press the start button to start the mortar spraying machine. When the mortar spraying machine is working, the spraying quality can be improved by adjusting the air volume.
6. mortar spraying machine is a screw pump with adjustable speed, and its output flow is 0-8 L/min. In the work of mortar spraying machine, as long as the return flow is adjusted to the output speed suitable for construction requirements.

Company Profile

Shaanxi Saifusite Mechanical Electrical Equipment Co., is a professional company which engaged in researching, developing, manufacturing hydraulic mining equipment, hydraulic construction machinery equipment, ultra-high pressure pumping station, cylinder and other mine equipment.Since the company since its inception, has been in line with the concept of quality first, reputation first, with high quality and thoughtful service return customers and society.
At present, Shaanxi Saifusite Mechanical Electrical Equipment Co., produces the product has a variety of cleavage gun, splitting rods, splitting machine models, dig to drill machine, electric hydraulic pump and high pressure cylinder, high pressure jack, synchronizing lifting equipment, such as broken hammer hydraulic machinery.
Shaanxi Saifusite Mechanical Electrical Equipment Co., has decades of rich experience in ultra-high voltage equipment. No matter today or in the future, it is absolutely a reliable and excellent brand.

Packaging & Shipping

 

FAQ

Q1: Warranty terms of your machine?
A1: One-year warranty for the machine and technical support according to your needs.

Q2: Will you provide some spare parts for the machines?
A2: Yes, of course.

Q3: What about the voltage of products? Can they be customized?
A3: Our standard voltage is 380V, 50HZ, and 3phase. The voltage can be customized according to your equipment.
 
Q4: Which payment term can you accept?
A4: 100% T/T( Decide according to actual situation)

Q5: How long will it take to arrange production?
A5: we can deliver the normal goods within 3-5 working days. Other nonstandard electrical items we will deliver within 25-30 days.
 
Q6: Can you accept OEM orders?
A6: Yes, with a professional design team, OEM orders are highly welcome.
 
Q7: Which trade term can you accept?
A7: Available trade terms: FOB, CIF, CFR, EXW, etc.